TECHNOMIG 210 DUAL SYNERGIC 230V
Microprocessor-controlled MIG-MAG/FLUX/BRAZING/MMA/TIG DC-Lift multi-process inverter welding machine.
The flexibility of use and the different welded materials (steel, stainless steel, aluminium) or brazed (galvanized sheets) confirm Technomig Dual Synergic as an excellent solution in a wide variety of fields of application, from maintenance, to installation, to bodywork interventions.
The rapid SYNERGY adjustment of the welding parameters, thanks to the ONE TOUCH LCD SYNERGY technology, makes the product very simple to use.
The intelligent and automatic control of the arc, moment by moment, will maintain high welding performance in all working conditions, with different materials and/or gases.
It is also possible to manually intervene on the length of the arc: this adjustment will allow you to modify the shape of the welding seam based on the welder's style.
The ONE TOUCH LCD graphic display allows better reading of all welding parameters.
Low weight and maximum compactness also ensure easy transportability to all intervention sites, both indoors and outdoors.
Characteristics:
Polarity change for NO GAS/Flux, MIG-MAG/BRAZING welding;
25 synergistic curves prepared;
Display of voltage, current and welding speed on LCD display;
Adjustments: wire rise ramp, electronic reactance, final wire burn time (burn back), post gas;
Selection of 2/4 time operation, spot;
VRD device;
Thermostatic, overvoltage, undervoltage, overcurrent, motor generator protections (+/- 15%).
Complete with MIG-MAG torch, cable and work clamp
TECHNICAL DATA:
| MAINS FREQUENCY |
50/60 HZ |
| MAX DC CURRENT (EN60974-1) |
180 @ 20%A
|
| MAX NO LOAD VOLTAGE |
52 V |
| CURRENT ABSORBED AT 60% |
15 A |
| POWER ABSORBED AT 60% |
2.2 KW |
| POWER FACTOR (cosphi) |
0.7 |
| Ø ALUMINUM WELDING WIRE |
0.8 - 1 mm |
| Ø STEEL WELDING WIRE |
0.6 - 1 mm |
| Ø BRAZING WIRE |
0.8 - 1 mm |
| DIMENSIONS |
46 X 24 X 36 cm |
| SINGLE-PHASE MAINS VOLTAGE |
230 V |
| CURRENT REGULATION RANGE |
20 - 200 A |
| DC CURRENT |
100 A |
| MAXIMUM ABSORBED CURRENT |
32 A |
| MAX ABSORBED POWER |
5 KW |
| YIELD |
85% |
| Ø ELECTRODES USABLE IN DC |
1.6 - 3.2 mm |
| Ø STAINLESS WELDING WIRE |
0.8 - 1 mm |
| Ø CORED WELDING WIRE |
0.8 - 1.2 mm |
| PROTECTION DEGREE |
IP23 |
| WEIGHT |
13 KG |
