High Strength Threadlock Sealant 24g Green

DESCRIPTION:

• Vibration resistant

• Single component - easy to apply

• Compatible with all types and shapes of threads

• Seals even in threads

• Anaerobic glue is a single component glue that hardens in the absence of air when it comes into contact with metal

• Anaerobic glue bonds, seals and fixes screw connections, connection parts, bearings and pipe connections easily, safely and permanently

• Anaerobic glue replaces conventional fastening methods such as cotter pins, spring washers and washers

TECHNICAL DATA:

• Base: methacrylate ester

• Colour: green

• Odour: characteristic

• Viscosity (25°C): 400-700 mPa.s

• Density (25°C): 1.10 g/cm³

• Temperature resistance: -55°C to +150°C

• Maximum gap filling capacity 0.15 mm

• Breaking torque: MLB (DIN EN ISO 10964): 28-35 Nm

• Shear strength (DIN 54452): 15 - 20 N/mm²

• Touch dry: 15-30 min.

• Curing: 1-3 hours

• Full cure: 12 hours

• Shelf life: 24 months

• Max. thread: 20

• Strength class (DIN 30661): 3

• Flash point: >100ºC

VERSION:

high strength - medium viscosity - difficult to disassemble

HOW TO USE:

Clean the parts to be joined. Apply enough glue and assemble. Immediate assembly is not necessary as the material only reacts after the parts have been assembled.

Anaerobic liquid plastics do not react with metal-plastic combinations, in which case an activator must be used.

Different grades with different strengths and viscosities allow for precise adaptation to your application and are crucial for successful bonding.

Curing can be significantly accelerated by activators.