Wynn's Ice Proof for Diesel Cold Flow Improver 250ml - Code W22710

The professional-grade Wynn's Ice Proof for Diesel (Product Code: W22710) is an advanced winterized chemical conditioning treatment engineered explicitly to improve diesel fuel fluidity at low temperatures and prevent fuel freezing. Developed to manage the widest possible range of middle distillate diesel fuel compositions, this high-efficiency additive suppresses the crystal growth of wax components, safeguarding critical fuel system infrastructure from thermal restriction and securing ultimate cold-cranking reliability in severe winter environments.

Design Details and Functionality

Ice Proof for Diesel targets the core molecular configuration of paraffin waxes naturally found in diesel fuel lines. As ambient temperatures drop, these waxes tend to crystallize and precipitate, quickly blinding the internal pores of the fuel filter element and obstructing the flow path toward the injection pump and nozzle assemblies. The Wynn's chemical formula drastically retards the formation and aggregation of these paraffin crystals, depressing the Cold Filter Plugging Point (CFPP) down to extreme limits of -30°C. By optimizing fuel volatility and flow mobility within the main tank, this compound shields high-pressure injection pumps and precision injector pins against cavitation and mechanical contact wear due to intermittent fuel starvation, significantly maximizing cold-weather performance parameters.

Technical Specifications

Application Directions and Calibrated Dosage

• Standard Treatment Ratio: Dose at 0.1% volume directly into the tank, equivalent to 25 ml of fluid per 25 liters of diesel fuel.
• Method of Addition: Pour Ice Proof for Diesel into the vehicle tank prior to filling up to ensure rapid, uniform chemical blending with the main fuel volume.
• Recommended Service Interval: During winter cycles, execute the treatment every 3,000 km or regularly every 3 full tank refills.
• Critical Application Thermal Window: For maximum treatment benefits, add the formula at approximately 5°C above the baseline diesel "cloud point," when the paraffin components are still fully dissolved. A maximum application ambient temperature of around 0°C is highly recommended; do not add if the target fuel has already begun to crystallize or separate.

Engine Suitability & Fuel Configuration

Power Plant Architecture	Fuel Grade Specifications
Engine Compatibility	Optimized for use across all compression-ignition power plants, including standard Diesel internal combustion engines, turbocharged engines, and Hybrid Diesel vehicles.
Fuel Standards	Fully compatible with all grades of commercial diesel blends (middle distillate fuel configurations).