Universal Ambidextrous (Right and Left Hand) Cabin Door Handle for Deutz-Fahr 07C Series & Intrac 2004 Tractors - Part Number: 65404010
The universal ambidextrous cab door handle (reversible RH or LH mounting) (part number 65404010, genuine Deutz-Fahr OEM reference 04345504 / 4345504) is an OEM-standard manual release assembly engineered to actuate the cabin door latch mechanisms with precision, ergonomic comfort, and smooth mechanical action on Deutz-Fahr agricultural tractors (compatible with LH latch 65404008, RH latch 65404009, protective cover 65404071, and key 65400008). Manufactured from high-impact structural polymer fortified with UV stabilizers and wear-resistant internal pivot linkages, it provides a firm, ergonomic grip even in demanding field environments when wearing heavy work gloves. Its symmetrical and reversible architecture permits straightforward mounting on either the right-hand (passenger side) or left-hand (driver side) door, while the dedicated base gasket ensures reliable sealing against rainwater, field mud, and fine dust ingress. This OEM-equivalent replacement offers direct plug-and-play fitment across Deutz-Fahr 07C Series tractors (models D 4507C, D 4807C, D 5207C, D 6007C, D 6207C, D 6507C, D 6807C, D 6907C, D 7007C, D 7207C, D 7807C) and the Intrac 2004 multi-purpose tractor.
Key Features & Engineering Advantages
- Reversible Ambidextrous Geometry (RH / LH): Symmetrical architecture allows universal installation on either the right or left cab door, streamlining fleet inventory management and eliminating workshop assembly errors.
- UV-Stabilized High-Impact Technopolymer: Heavy-duty polymer casing engineered to withstand wide thermal swings (-30°C to +80°C), intensive solar radiation, hydraulic fluids, diesel fuel, and regular high-pressure washing.
- Smooth & Dependable Unlatching Action: Calibrated internal mechanism fitted with a high-resilience steel spring, ensuring crisp, low-effort door opening free of sticking or excessive free-play.
- Factory-Accurate Alignment: Mounting hole centers and stud profiles strictly conform to original Deutz-Fahr door frame specifications, allowing quick bolt-on replacement without drilling or alterations.
- Molded Environmental Base Gasket Included: High-grade perimeter elastomer gasket seals the handle-to-door interface, preventing water, mud spray, and abrasive field dust from entering the interior cab frame.
Technical Specifications
| Commercial Part Number |
65404010 |
| Mounting Location / Side |
Ambidextrous – Right and Left Doors (RH / LH) |
| Deutz-Fahr OEM Reference |
04345504 (also referenced as 4345504) |
| Component Classification |
Exterior cabin door handle assembly |
| Cab Enclosure Application |
Cabins 07C series and Intrac 2004 |
| Material Composition |
UV-stabilized structural technopolymer with internal steel pivot pins and return spring |
| Actuation Method |
Mechanical manual release to operate the door latch mechanism |
| Matching Cabin Components |
Compatible with LH latch 65404008, RH latch 65404009, cover 65404071, and key 65400008 |
Equipment Compatibility & Tractor Application Guide
| Manufacturer |
Tractor Series |
Supported Tractor Models |
| Deutz-Fahr |
07C Series |
D 4507C, D 4807C, D 5207C, D 6007C, D 6207C, D 6507C, D 6807C, D 6907C, D 7007C, D 7207C, D 7807C |
| Intrac Series |
Intrac 2004 |
Installation Advice & Workshop Notes: Before installation, dismantle the interior door pillar trim or cover (or protective cover part 65404071) to access the rear securing fasteners and carefully disconnect the linkage rod retaining clip connected to the door latch mechanism (65404008 on LH or 65404009 on RH). Remove the old handle and clean the mounting surface of dust and grease. Position the supplied molded rubber gasket flush against the door sheet metal to seal against water and dust infiltration. Tighten mounting nuts or screws progressively to avoid warping the polymer housing. Finally, adjust the actuator rod length so that the handle retains approximately 1–2 mm of initial free play before engaging the latch pawl, ensuring light, smooth opening and positive perimeter weatherseal compression upon closure.
