Energy Power 100Ah 760A 12V SMF Maintenance-Free Starter Battery - Part Number: M 13.A IV

The Energy Power 100Ah 760A (12V) heavy-duty starting battery (part number M 13.A IV, case size L4 - 100 AH STD SMF) is an authentic OEM-grade high-performance accumulator engineered to deliver immediate cranking power and stable electrical output across agricultural machinery, light commercial vehicles, and passenger cars. Manufactured with advanced Calcium/Calcium (Ca/Ca) technology and expanded metal plates, it drastically reduces self-discharge while increasing internal grid corrosion resistance by +50%. The sealed monobloc SMF (Sealed Maintenance Free) casing integrates a labyrinth double-lid design with an integrated explosion-proof flame arrestor and a built-in optical magic eye for instant state-of-charge inspection. Built to withstand extreme climates and heavy vibration, it offers a +30% longer operational life and supports up to 30,000 engine start cycles, complete with a reinforced B3 (Heavy Duty) base hold-down ledge and standard right-hand polarity (positive terminal on the right).

Key Features & Engineering Advantages

• Calcium/Calcium Expanded Metal Technology: High-density lead-calcium alloy plates eliminate water consumption, minimize self-discharge during prolonged storage, and deliver superior electrical conductivity.
• High Cold Cranking Power (760A CCA): Cranking output exceeding standard OEM specifications, ensuring reliable, instant starts for large-displacement diesel engines even in severe winter temperatures.
• Sealed Maintenance-Free Labyrinth Double Lid: Fully sealed SMF design internally recondenses acid vapor, equipped with an integrated ceramic flame arrestor to prevent accidental flash fires.
• Integrated Optical “Magic Eye” Charge Indicator: Built-in hydrometer in the upper casing provides quick, at-a-glance verification of electrolyte level and state of charge.
• Superior Corrosion & Vibration Resistance: 50% increase in grid corrosion resistance and 30% extended service life, tested to withstand up to 30,000 starting cycles under heavy-duty operating demands.
• Reinforced B3 Heavy Duty Base Ledge: Engineered B3 HD bottom hold-down profile ensures secure, vibration-resistant clamping in agricultural tractor trays, vans, and commercial vehicles.

Technical Specifications

Recommended Applications

Equipment / Vehicle Category	Operational Environment & Application Scope
Agricultural Machinery & Tractors	Row-crop tractors, telehandlers, combine harvesters, and specialized harvesting equipment subjected to severe vibration, high starter draw, and seasonal duty cycles
Light Commercial Vehicles (LCV)	Delivery vans, light trucks, and chassis cabs with high-frequency start-stop cycles and heavy onboard auxiliary electrical loads
Passenger Vehicles (Cars & SUVs)	Mid- to large-displacement diesel and petrol sedans, SUVs, and 4x4 vehicles engineered for L4 battery trays

Installation Advice & Workshop Notes: Before installation, turn off the vehicle ignition and disconnect the negative terminal (-) first, followed by the positive terminal (+). Clean the mounting tray and secure the B3 HD base clamp firmly to prevent internal plate damage from excessive vibration. Reconnect terminals by attaching the positive clamp (+) first and the negative clamp (-) last, applying a light coat of technical petroleum jelly or dielectric grease to prevent terminal corrosion. The unit is shipped fully charged and sealed: confirm the green charge indicator via the optical magic eye before putting it into service. During seasonal machinery storage, keeping the battery connected to an intelligent 12V maintenance charger is recommended.