Fuel Feed Supply Pump for Deutz-Fahr, Fendt, Same, Lamborghini, Volvo - Code 38006267

The low-pressure diesel fuel feed supply pump (commercial part number 38006267) is the vital hydraulic component designed to deliver continuous, steady fuel transfer from the tank to the high-pressure injection circuit on heavy-duty diesel engines. Fully interchangeable with original OEM references 02111961, G716201010100, and 02113859, it guarantees calibrated volumetric flow, steady operating line pressure, and flawless mechanical sealing against air leaks and priming losses. Engineered for extensive agricultural and earthmoving applications across Deutz-Fahr (Series 6, 7, 9 Agrotron, Agrotron K/L/M/TTV/X, combine harvesters, and Agrovector telehandlers), Fendt (400, 700, 800, 900, Farmer, and Favorit Series), Lamborghini Trattori (Mach, R6, R7, R8, Spark), Same (Audax, Diamond, Fortis, Iron, Iron³), and Volvo Construction crawler excavators.

Key Features and Construction Advantages

• Calibrated Fuel Flow & Line Pressure: Delivers consistent, interruption-free diesel transfer to the fuel injection equipment under heavy engine load.
• Superior Mechanical & Thermal Resistance: High-grade internal membranes and housing engineered to withstand engine heat cycles and standard or biodiesel blends.
• 100% Direct OEM Interchangeability: Built to precise original equipment tolerances for direct bolt-on installation without plumbing adjustments.
• Airtight Hydraulic Seal: Prevents system de-priming, line pressure drop, and difficult cold morning engine starts.
• Extensive Multi-Brand Compatibility: Broadly utilized across agricultural tractors, combine harvesters, telescopic handlers, and crawler excavators.

Technical Specifications & OEM Cross References

Machinery Application & Vehicle Compatibility

Manufacturer	Series / Range	Compatible Models
Deutz-Fahr	6 Agrotron Series / P / TTV / G	6120.4, 6130.4, 6140, 6140.4, 6150, 6150.4, 6160, 6160.4, 6180, 6190, 6210, 6155 G, 6175 G, 6185 G, 6205 G
Deutz-Fahr	7 Agrotron / TTV Series	7200 ST, 7220 ST, 7210 TTV, 7230 TTV, 7250 TTV
Deutz-Fahr	9 Agrotron TTV Series	9270 TTV, 9290 TTV, 9310 TTV, 9340 TTV
Deutz-Fahr	Agrotron / Agrotron New Series	Agrotron 200; Agrotron New 120, 130, 150, 150.7, 165.7, 180, 180.7, 210, 215, 235, 265
Deutz-Fahr	Agrotron K / L / M / TTV / X Series	K (90-120, 410-610), L (710-730), M (410-650), TTV (410-630), X (X710, X720)
Deutz-Fahr	Combine Harvesters (5600 / 6000 / C)	5650, 5660, 5665, 5680, 5690, 5695; 6040, 6060, 6065, 6090, 6095; C 7205, C 7206, C 9205, C 9206
Deutz-Fahr	Agrovector Telehandlers	Agrovector 26.6, 29.6, 30.7, 35.7
Fendt	Farmer & Favorit Series	Farmer 409, 410, 411, 412 (Typ 409-412); Favorit 711, 712, 714, 716 (Typ 711-716)
Fendt	Fendt 400 / 700 / 800 / 900 Series	411-415 (Typ 400-404); 712-718 (Typ 724-727); 818-820 (Typ 729-731); 922-936 (Typ 919-934)
Fendt	5000 & C Series	5220, 5250; 6280C
Lamborghini Trattori	Mach & Spark Series	Mach 200 ST, 210 VRT, 220 ST, 230 VRT, 250 VRT; Spark 150, 150.4, 160, 160.4, 180, 190, 210
Lamborghini Trattori	R6 / R7 / R8 Series	R6 (100-250, incl. .4 & .7); R7 (175, 190, 200, 210, 220); R8 (215, 230, 265, 270)
Same	Audax / Diamond / Fortis Series	Audax 200, 220; Diamond 215, 230, 265, 270; Fortis 120.4, 130.4, 140, 140.4, 150, 150.4, 160, 160.4, 180, 190, 210
Same	Iron & Iron³ Series	Iron (100-220, incl. .7 models); Iron³ 190, Iron³ 210
Volvo Construction	B-Series Crawler Excavators	EC160B LC, EC180B LC

Installation Guidelines and Workshop Notes: Before fitting the replacement fuel supply pump, clean the engine block mounting surface and inspect fuel lines for debris or micro-cracks. Always install a new mounting gasket or sealing O-ring. Tighten fasteners evenly in a cross pattern according to manufacturer torque specifications. After securing fuel unions, prime and bleed trapped air from the low-pressure circuit prior to cranking the engine to prevent pump cavitation and starting delays. Inspect for fuel leaks with the engine running at normal operating temperature.